Tiếng Việt
中文 (中国)System description
Electrostatic discharge (ESD) control coating system comprising a conductive layer, copper grounding strips, and an anti-static topcoat — conducting electric charge to the ground instead of allowing sparks that damage components or create fire and explosion hazards.
This system uses Kadier products with published technical data (TDS) — build-up table below; mixing ratios, drying times and physical properties are on the Products page.
- Controls the surface resistance of the floor within the ESD-required zones of electronics plants.
- Protects static-sensitive components on assembly lines and in test rooms.
- Reduces the risk of static sparks in areas storing solvents and flammable chemicals.
- Seamless, easy-to-clean surface like standard epoxy systems.
General technical framework
- Technology: Two-component anti-static epoxy + conductive layer; substrate: concrete meeting standard application conditions, with a grounding point.
- System configuration: Primer + conductive layer + copper grounding strips + anti-static topcoat.
- Acceptance: the project includes on-site resistance measurement with the project owner.
System build-up and technical data
| Layer | Kadier product | Reference consumption |
|---|---|---|
| Primer | Epoxy Primer | 0.2 kg/m² |
| Conductive layer | Anti-Static Epoxy Intermediate Coat | 0.4 kg/m² |
| Topcoat | Anti-Static Epoxy Topcoat | 0.6–0.8 kg/m² (~1 mm) |
Topcoat resistance: 1.0 × 10⁵ – 9.9 × 10⁹ Ω.
View full technical data (TDS)
General application process
- Survey the concrete substrate, confirm the grounding point and the ESD-required zones.
- Prepare the substrate to standard application conditions: clean and treat substrate defects before priming.
- Coat 1 — Kadier RC penetrating primer: adhesion base for the whole system.
- Coat 2 — Conductive layer + SG copper grounding strips: creating a path for electric charge to the building grounding system.
- Coat 3 — StatGuard SG anti-static topcoat: resistance acceptance measurement after full curing.
- Carry out acceptance with the project owner using on-site resistance measurement before handover.
Contact for a quote
StatGuard has no fixed price. Pricing follows a quotation after an actual site survey (area, substrate condition, ESD requirements, volume of substrate treatment and grounding).
Contact for a quote — or send a request via the Contact page.