System description

Water-based epoxy system: low odor during application, low VOC content — suitable for spaces in operation or with high hygiene requirements, such as food plants, hospitals, schools, and enclosed basements that are hard to ventilate.

AquaBase is configured project by project; contact Kadier to receive the technical data for the proposed build-up.

• Low odor — can be applied in adjacent areas that remain in operation.
• Low VOC content, measured per the TCVN 10370 method.
• Seamless, easy-to-clean surface, suitable for food and medical hygiene areas.
• Better fire safety than solvent-based systems while wet during application.

General technical framework

• Technology: Two-component water-based epoxy; substrate: concrete meeting standard application conditions.
• System configuration: Water-based primer + water-based epoxy topcoat.
• Standards framework: TCVN 9014:2011 — Epoxy paint.

General application process

1. Survey the concrete substrate and ventilation conditions, advise the system configuration by area of use.
2. Prepare the substrate to standard application conditions: clean and treat substrate defects before priming.
3. Coat 1 — AquaBase AB water-based primer: penetrates and seals dust on the concrete substrate.
4. Coats 2–3 — AquaBase AB water-based topcoats: apply under ventilation conditions per the TDS instructions.
5. Inspect the surface and carry out handover acceptance with the project owner before handover.

Contact for a quote

AquaBase has no fixed price. Pricing follows a quotation after an actual site survey (area, substrate condition, volume of substrate treatment).

Contact for a quote — or send a request via the Contact page.