Category Archives: Uncategorized

A freshly coated epoxy floor looks beautiful, then after a few months starts blistering in patches, peeling in sheets, with moldy edges at wall bases — while the top surface was never splashed with chemicals or hit by anything. Very likely the culprit lies beneath the floor: moisture and groundwater from the ground seeping upward, […]

Administrative correction (please read first): From 01/07/2025, Vietnam has 34 provincial-level administrative units; the former Bac Lieu area now belongs to Ca Mau province. In this article, “Bac Lieu” is only a familiar geographic cluster name, not a current administrative unit. All industrial zones and fishing ports below are mentioned as market context, not as […]

Administrative correction (please read first): From 01/07/2025, Vietnam has 34 provincial-level administrative units; the former Kien Giang area now belongs to An Giang province. In this article, “Kien Giang” is only a familiar geographic cluster name, not a current administrative unit. The industrial zone names below are mentioned as market context, not as a list […]

Administrative correction (please read first): From 01/07/2025, Vietnam has 34 provincial-level administrative units; the new Dong Thap comprises the former Dong Thap and the former Tien Giang. In this article, the old names are only familiar geographic cluster names. Illustration: a riverside industrial zone (generic illustration). Source: Pexels, by Efrem Efre. An illustration, not a […]

Note on the figures in this article (read first): This is a technical article. Every specific threshold and condition below is an industry reference or documentation from another paint manufacturer, not a Kadier specification or commitment. Kadier’s own specifications for each RollCoat, LevelFlow, StatGuard and AquaBase system do not yet have technical data sheets (TDS), […]

Note on the figures in this article (read first): This is a technical article. Every moisture threshold and hydrostatic pressure below is an industry reference or documentation from another paint manufacturer, not a Kadier specification or commitment. Kadier’s own specifications for each RollCoat, LevelFlow, StatGuard and AquaBase system — the permitted moisture threshold per system, […]

Cai Mep is an industrial park where port land covers nearly a third of the area: 670 ha in total, comprising 200 ha of port land, 249 ha of industrial land and 221 ha of roads, transport, greenery and technical areas, according to the source. This is a standalone article on Cai Mep alone. This […]

Phu My is where an industrial floor faces the harshest combination of conditions on a single surface: extremely heavy loads, chemicals and oil and grease, salt air and the high humidity of a coastal environment. This article goes zone by zone through Phu My to match the coating system to each area, rather than looking […]

Duc Hoa is the western gateway of Ho Chi Minh City, home to the widest range of incoming industries in the western group: from electronics, engineering and supporting industries to textile dyeing, pharmaceuticals, cosmetics and logistics. This article goes industry by industry through Duc Hoa, rather than looking at the whole cluster in general as […]

Note on names: Tan Tao formerly belonged to the former Ho Chi Minh City and still belongs to Ho Chi Minh City after the merger effective 01/07/2025; this article does not use any old area name as a current administrative unit. This article looks at Tan Tao from the inside out, with exactly three angles […]